Good day. All summer residents faced a problem when unnecessary overgrowths grew in the garden or near the house and they need to be removed. Some are sawn under the root, others are dug with a shovel. However, the author of YouTube channel "Mr Suny" offers us another option to solve this problem. He makes device for uprooting, with the help of which you can easily uproot and root a small tree. Today I will show and tell you how to make this homemade. Homemade is very easy to manufacture and understand how to make it or how it works, it will not be difficult. Well, just in case, I’ll leave a video below so that you better understand the manufacturing process.
Let's start, for manufacturing you will need:
1. Brake pad
2. Steel plate
3. Profile pipe
Step 1. Production
At this point, a piece of metal strip is cut. Then a grinder is made in it. Then the strip is welded to the block, as shown in the photo. Next, two pieces of strips are cut. Strips are welded at an angle of 90 degrees. Notches are made on the plates with a larger grinder. Then a piece of the profile pipe is cut (the sizes depend on your wishes), two holes are drilled in it and a slot is made. The pipe is bolted to the block, and the l-shaped part is attached to the pipe.
Step 2. Testing
Thus, from unnecessary materials, such a useful homemade product was obtained. You can watch the testing of this homemade video. Judging by the video, the device does an excellent job of its job. That's all, thank you for watching. If the article is suitable, then put the likes.