The rivet nozzle is a universal adapter that allows you to use any drilling tool to install blind rivets. The nozzle works with all types of drilling tools (drill, screwdriver or puncher) in the presence of a quick-clamping chuck and reverse function. Installing rivets with this nozzle is as simple and convenient as using an expensive professional tool, but much easier and faster than using a manual rivet. The rivet nozzle significantly increases the speed of work and increases productivity - it takes only 1.5 seconds to install 1 rivet, while the operator does not need to apply any physical effort. When working with the adapter, there is practically no recoil that occurs when working with a hand tool at the time of riveting the rivet rod and has a very negative effect on the joints of the fingers. When using an adapter with a cordless tool, you get complete freedom of action - without being tied to a power supply network or a pneumatic line, you can work anywhere: on the street, on the roof or in a suspended cradle at a height. The rivet head is a very convenient and economical solution: it is much easier and faster to work with it than a hand tool, and the cost of the head is an order of magnitude lower than a professional tool.
FEATURES AND ADVANTAGES:
High speed - 1.5 seconds to install 1 rivet. Versatility - works with all types of drills and screwdrivers. Safety - there is no kickback dangerous for joints when the rod is torn off. Freedom - no connection to mains or compressor. Power - sets rivets up to Ø 4.8 mm. Productivity - does not require physical effort. The cost is much lower for cordless rivet tools. Compact - no need to carry an extra case.
Cost: ~ 938