A great gift for children, and not only can be done in literally an hour. To do this, you will need the following
Materials and tools:
- Board 6-15 mm thick;
- Dowel 6 mm diameter;
-Cord;
-Sandpaper;
-Crown on wood;
-Drilling machine;
-Milling machine;
-File;
-Grinder;
- Joiner's glue;
-Saw;
-Vise;
-Vegetable oil;
-Retail;
P.S. If desired, you can do without most of the power tools.
Step One: Cutting the Rings
From the board master, cuts two rings with a crown of 6, 4 cm.
Step Two: Milling
With the help of a cutter or file rounds the edges of the workpieces.
Step Three: Grinding
Grinds workpieces.
Step Four: Bonding
When cutting blanks with a crown, holes were drilled in their center. The master installs the dowel with the applied one in the hole of one blank. Then it puts on the inner part of the workpiece spacers of plywood with a thickness of 4 mm, this is necessary so that the distance between the workpieces is the same. Then lubricates the dowel with glue and sets the second workpiece on top.
Cuts the protruding part of the dowel and clamps the yo-yo in a vice until the glue dries.
Step Five: Finish
The glue has dried, and the master removes the spacers, and then covers the product with linseed oil.
Step Six: Cord
Tie a cord to yo-yo.
Yo-yo is ready, now you can give it to your child or please friends.
