Surely many are familiar with the situation when, when working with a puncher or a drill, dust and chips fly in all directions, get into the eyes, the floor, objects of furnitureas well as hands. Not much, not to mention the serious harm to health by inhalation of cement dust.
Using this fixtures You will forget about this problem and will be able to perform some types of work without first protecting all surrounding surfaces from possible pollution (for example, install a TV bracket, drill holes in the ceiling for a new chandelier, etc.), and remove dust and dirt after each drilled holes in the apartment now practically do not have to.
The boot is a rubber casing that is securely fixed to the drill (suitable for drills with a diameter of 6mm to 14mm). The principle of operation of the device is extremely simple - during operation, the casing limits the dust dispersion area and sucks it when pressed by the plunger principle. To prepare for work, a rubber gasket is placed on the drill (4 pieces are included) at a distance of ~ 3 mm from the shank, then the casing itself is put on the drill (the installation process of the device is more clearly shown in the pictures below). Note that after installation the boot is recommended to be pressed to the body of the power tool to achieve the most tight connection.
The product is presented in two colors - white (100mm and 130mm long) and black (100mm long). According to the seller, the anthers of black have a strong smell of rubber, so the white version is recommended for purchase (it is slightly more expensive).
Thus, for absolutely ridiculous money, you will once and for all get rid of the phenomenon of building dust flying in all directions. After all, as they say "cleanliness is the key to health."
Cost: ~ 230