» Fixtures » Instruments »Affordable homemade of seven bars. Do-it-yourself Joiner's Vise

Affordable homemade of seven bars. Do-it-yourself Joiner's Vise


Friends, friends, let's look at a man working with a tree. What can a craftsman not do without? True, without elementary fixtures to fix your workpieces. The necessary device that any carpenter must have is a simple but reliable vice. For working with plywood, wood, Chipboard, etc. in fact, the most necessary fixture is a vice for carpentry, you can’t work much on your knee.

To make this simple device at home is absolutely real and absolutely simple. In addition, a craftsman can make a vise in accordance with his needs, depending on the parameters of wooden blanks. In the implementation of his project, any master should determine the sizes and other parameters based on his needs, i.e. specifically for what work the above mentioned device will be used.

In this article, we will show you how to make a basic model simple vice for carpentry. And then think, decide and create yourself ...

Video review on the order of manufacture of the device:



What we need:
- Wooden blocks, depending on the size of your fixture.
- A bolt (in our case, a figure eight, length is 120 millimeters), a piercing nut.
- Wood screws.
- One electrode.
- Stain or varnish.

From the tools:
- Jigsaw (can be electric or manual) or a hacksaw.
- Drilling machine, or ordinary drill.
- The set verified.
- A screwdriver.
- Welding (in the absence of operations performed by the welder, you can replace your ideas for solving the corresponding stage).
- Cutting machine.
- Kern.
- Skin for finishing the product.

You need such a set in order to make a vise.

The sequence of production of our device:










- We prepare bars (sizes based on your needs for further work with wood), only seven.
- We assemble the lower platform of the device.
- We collect the working part of the vice (You can understand by looking at the video review of the manufacture, located in the article above).
- Install the working part on the lower platform.
- Using a cutting machine, we bring the resulting vice to a decent appearance.
- Fine-tuning our vices is done using skins and varnish or stains.

A simple and necessary device is ready, use it for health and with pleasure!
7.7
7.7
7.7

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
11 comments
Author
Quote: Korolev
about 30 minutes let me doubt

If you don’t make a movie, this is exactly the time ...
Author
Quote: Korolev
with skin and varnish or stain

The video also shows a cutting machine with a grinding wheel, 5 minutes of work.
brnjh1
I did not understand the irony, this is the easy way, almost no materials and work for 30 minutes ...
I regret that you do not understand the simplicity of the pads on the jaws of a vice, and about 30 minutes, let me doubt ...
Fine-tuning our vices is done with sandpaper and varnish or stain
smile
brnjh1
There are many answers, for example, they simply do not exist ...
Your example is not accepted, for a person working not only with his head, but also with his hands - and there is no normal vice? I do not believe! nea
Compact vise
This vise is good to use on a drilling machine, they simply ask there. And you can pinpoint something (well, of course it won’t work out very much), and use it as a lining (anyway, when you drill a piece of wood is put in, but then two in one), and when the sponges finally become unusable, replace them long. In general, despite the apparent primitiveness, this is a very efficient device.
Author
Quote: Korolev
We're not looking for easy ways

I did not understand the irony, this is the easy way, almost no materials and work for 30 minutes ...
Author
Quote: Korolev
soft sponges on an ordinary vice

There are many answers, for example, they simply do not exist ...
It seems that soft sponges on an ordinary vice would be much easier! But we are not looking for easy ways, there is nothing to discuss! scratch
Author
Quote: Khatul Madan
visual aid (layout) for those who want to make a vice

You are right, if for yourself, then it is possible from oak, the processing is the same ... :-)))
Quote: "In the implementation of his project, any master should determine the sizes and other parameters based on his needs"
accept the invitation to discuss a new article about bars and vice ...
Immediately the question is, was it possible to make a vice from a stronger material than pine blocks? And then, looking at the annual layers of wood, there are big doubts about their strength, or you did not make them for work, but as a visual aid (layout) for those who want to make a vice.

We advise you to read:

Hand it for the smartphone ...