Mankind has come up with a huge number of different electric tools, and the nozzles for it come up with a simple master.
In this article, the author of the Gökmen ALTUNTAŞ YouTube channel will tell you how to make an unusual grinding head for an electric jigsaw in a few minutes.
Materials
- Small wooden sticks
- Velcro Velcro
- Sandpaper with Velcro base
- Epoxy adhesive.
Instruments, used by the author.
—
- Scissors, a knife.
Manufacturing process.
So, the author cut out three wooden blocks, and tore the Velcro Velcro from a regular grinding disc.
Next, three small sticks are glued, and between them an old jigsaw blade is glued.
Then the Velcro is trimmed to fit the base.
And sticks to it with epoxy glue.
Now the author cuts the size of the emery wheel.
That's all, a simple jigsaw head is ready.
Further, the author checks it in action.
If the sandpaper is clogged, you can turn it over or replace it.
Here is such an interesting end nozzle turned out.
Thanks to the author for a simple but interesting sanding device for a jigsaw!
All good mood, good luck, and interesting ideas!
Author video can be found here.