Sometimes the devices that are in our daily use lose their legs (because they are often simply attached to the glue) and there is an urgent need to replace them with something, or you need to install some kind of reliable support homemade. You can, of course, use covers from pharmacy jars, wine corks or other “improvised” options, but they do not look particularly aesthetically pleasing, they are not at all durable (dry out, deform during fixation), and in addition, you need to additionally think of ways to fix them. In this regard, it seems advisable to purchase standardized legs with ali.
The legs have the shape of a truncated cone, inside them is a metal washer. They are made of soft plastic, and, despite this, practically do not slip on the table. The package includes 20 legs.
Their characteristics are as follows:
• outer diameter of the upper part - 15 mm;
• outer diameter of the lower part - 18 mm;
• inner diameter of the leg (for the screw head) - 6 mm;
• inner diameter of the metal washer - 3mm;
• total height - 5 mm;
• weight - 30g. / 20 pcs. (1pc. Weighs 1.5g.).
A pleasant feature of such legs will be the fact that they completely leave no black hard-to-remove traces on the surfaces. Their installation is also extremely simple - it is enough to drill a hole for them in the required place on the body and secure, for example, with a screw. Note that tightening the fasteners is enough until the backlash disappears; pulling is fraught with squeezing the metal washer out of the leg.
It’s cheap and angry that the only drawbacks are the presence of a flash on a large number of legs, but it will not be difficult to remove it with any cutting tool (scalpel, for example). With such legs, you can give a complete look to a new homemade product or restore the supporting surface of an already-used device. We also note that the seller can find legs of a higher or larger diameter.
Cost: ~ 85