» Topics » DIY ideas »LED BULB - long lasting

LED BULB - long lasting

Topics / DIY ideas
Added 4 commentary
Due to thermal breakdown of the LED, the lamp fails, this is in most cases. A simple upgrade will help extend the long life of the LED bulb.

Under the side of the diffuser using a mini drill with a 3 mm drill, make holes at a distance of 5 mm between them, at an angle of 5 degrees. This is to not accidentally damage the LEDs.
LED BULB - long lasting



Several holes can be made in the center of the diffuser, this will improve ventilation.
Such bulbs have been burning for me almost round the clock for six months now.
Question \ topic is automatically published in the social. site network - stay tuned for answers there:
1
Added 4 commentary

Suitable for topic

Related topics

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
4 commentary
+1
Reply To quote A complaint
Riddled with poor bulbs, maybe they are cold now smile
+2
Reply To quote A complaint
I once upon a time, at the dawn of the appearance of diode lamps (When there was no Ali Express yet, and Taina-Dil took only a "stick")))), I bought a dozen diode lamps "only" for seven dollars !!! (We had them much more expensive than the "energy saving" widely advertised then ... Dollars at 15-20 apiece.)
The first burned out a month later ... (It was the "candles" E-14) ... Dismantled .... I see - it’s done just like that !!! Diodes just can't cool !!! I drilled a series of holes from below, in a plastic case, along the edge of the base. Having dealt with the location of the tracks, he drilled holes in the board. And finally, drilled holes at the very top of the "nose" ....
The bulbs are twisted into a chandelier. Vertically, "nose up" ...
It's been ten years ... Of that dozen, six are still on fire.))))
+1
Reply To quote A complaint
......
Burning from the word "burn out"? (joke)
I was engaged in a bit of amplifiers, there is also a question of cooling, so according to some canons of aerodynamics with natural air circulation, the diameter of the perforation holes is desirable at least 6 mm, with chamfers or rounded edges. The amp is still in the case, I don’t know in the bulb ...
Guest Vladimir 0
Reply To quote A complaint
When repairing the lamps, I made the ventilation of the skirts, however, anyway, the c / diodes burn out.

DIY categories

We advise you to read:

Hand it for the smartphone ...