» Hiking, hiking »A fixture for assembling a Finnish candle with your own hands

Do-it-yourself fixture for assembling a Finnish candle

Hello dear readers and the inhabitants of our site!
Many of you like to go camping or relax in nature. You probably also know the so-called "Finnish candle", which consists of several logs, or one chopped into several parts. In order to connect them, various fixturesor wire.

In this article, the author of the George Kosilov YouTube channel will tell you how he made a device that simultaneously fixes the logs together, and at the same time is a stand for the container.

Materials
- Steel bar 8 mm in diameter
- Sheet plywood, carnations, M6 nuts.

Instruments, used by the author.
- Vise
-
-
- Grinder
-
-
- Ruler, marker, hammer.

Manufacturing process.
So, the author chose a steel bar with a diameter of 8 mm as the material for making home-made, he even turned out to be a little thicker. Ordinary fittings are also quite suitable.

The master cuts off six steel blanks 180 mm long and 80 mm each from a steel bar. You can do more.




It fixes short workpieces in the chuck of a screwdriver, and grinds them on a grinder.





These are the details you should get.

Now these elements need to be welded together. In order to simplify this process, the author made a simple conductor from a piece of plywood. I simply hammered small cloves into it so that the parts stayed together. And between the bars I put a couple of washers M6.



The welding process itself did not take much time, and here are three ready-made devices. For a special charm, you can clean the welds and surface of the rods with a stripping brush disk.



Everything is ready for a picnic in the forest! It remains to saw logs, put them vertically, and hammer in the upper part of the received devices.

And then it's a matter of technology. Make a fire, and fry potatoes.





Of course, the sizes of such brackets can be changed to fit your requirements. To facilitate the design, you can take a bar for pegs with a diameter of 4 mm, and for crossbars 6 mm in diameter. Such simple staples come in handy in the country.
Thanks to the author for a simple but useful fixture for a Roman candle!
All good mood, good luck, and interesting ideas!

Author video can be found here.
8.8
9.4
9.9

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
5 comments
Guest Ilya
Take 3 construction brackets and all business!
If it burns out or bends, replace it.
Name
Bracket building steers! )))
Oleg Proskuryakov
Who needs all kinds of appliances now, when firewood cannot be cut in the forest, fires cannot be burned, and in some places it is impossible to go into the forest - FINE immediately.
Author
And how to bury this system 30 cm underground?

This will be another article ... read In the sense of text with pictures xaxa
Why bury? Just make a hole, dig around the perimeter, and fell to yourself. The rules of the PPB have not been canceled.
And in the country = do as you want.
strizh74
And how to bury this system 30 cm underground? So as not to be fined 5 pieces. Too lazy to dig ...

We advise you to read:

Hand it for the smartphone ...