» Flashlights and flashlights »How to make a fake LED bulb

How to make a fake LED bulb

Hello dear readers andthe inhabitants of our site!
All of you perfectly know how many videos on the Internet are present, where various experiments with energy generation are shown. And even more various "perpetual motion machines".
In this article, the author of the foguista YouTube channel will tell you how light bulbs are made to demonstrate these experiences.

This homemade product is very easy to manufacture and is suitable for children who love magic tricks.

Materials
- Bright white LEDs 4 pcs
- Battery 23A to 12V
- Burnt out LED lamp
- Cardboard sheet
- Thin wires
- solder
- Insulation tape.

Instruments, used by the author.
- Knife, screwdriver, scissors, pliers, wire cutters
— .

Manufacturing process.
The first thing the master found was a burnt out LED lamp. Now you need to disassemble its body. To do this, first remove the cap.


Then, after cutting the glue around the perimeter, pull out the LED assembly and the control board.



Now you need to pull out the central contact on the lamp base.


Next, a thin wire is passed into the central hole, and the contact is set in place.




It is also necessary to solder the second wire to the external contact of the cap, although they usually remain when removing the board.

Then a circle is cut out of thin cardboard to the size of the LED assembly. It is necessary to pierce the holes for the legs of the LEDs.



The author sets the LEDs in their place.



Then it bends the legs, observing the polarity and solders them together.



Here is such a simple scheme should be assembled.

In addition, solder the wire from the cap, and cut it in half.

Now the author will need a simple 12 volt battery. Such are used in control panels for car alarms. Makes a test connection of the battery and closes the contacts on the base. LEDs work.


Using ordinary insulating tape or tape, connects the wires to the contacts on the battery.



Checks again before assembly.

Assembles the entire structure in reverse order.




Now you can close the contacts even with a thin piece of wire or foil, you get such a trick.Yes, and of course, such a light bulb can be used as a regular flashlight.

Thanks to the author for the simple but interesting design of the trick light bulb!
All good mood, good luck, and interesting ideas!

Author video can be found here.
4.9
7.5
6

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
7 comments
Guest Fedor
Yeah, there’s sure to be a wise guy who, until you’re at home, screw it in place of a light bulb!
Author
Yeah, for 100 rubles it's not even a fool to fool around. Is it possible to hand over the warranty, look for a check with a box boss
And I would throw it away and not fool around.))) It is now. And five years ago - yes, repaired)))
I would too, but he prefers to show tricks.
Guest Alexander
And I would have repaired it during this time
Author
And "free electricity generators" they can "check"
This is a modernized piece of props for the focus from Science and Life called "the dull bulb burns in the hand, not connected anywhere."

We advise you to read:

Hand it for the smartphone ...