Hello, friends the inhabitants of our site!!! I want to tell you how do it yourself in 20 minutes you can make a mini - wash for your car.
To do this, we need the following materials and tools:
1 –B / U washer tank for any passenger car, and the windshield washer itself.
2- any soft-brushed brush, 3 meters of red mounting wire, and the same amount of black wire, 3 meters of thin hose for the washer or the same amount of silicone tubing, two “Mama” car connectors, two “Crocodile” clips, if the sink will be connected to battery, two automotive plastic ties.
3 - soldering iron, solder, tweezers, pliers, wire cutters, drill, drill
Putting it all together in this way.
Step 1. We solder the “Mama” connectors to the wires of the length we need, and on the other hand, the “Crocodile” clips - for connecting to the battery. Instead of these clamps, I connected two military “Papa” plugs - to connect the sink to the power supply of the computer that I have.
Step 2 Further on top of the brush, in the middle we drill a hole for the hose.
We put the end of the hose through this hole, fix it to the brush handle with two plastic ties, connect the second end of the hose to the washer outlet fitting.
Step 3 We connect the power wires to the washer, red to the plus and black to the minus, the second ends of the wires to the battery auto, in the same polarity. I connected it to the 12V power supply. We connect the hose to the washer fitting. Pour water into the tank, and supplying 12v power, check the operation of the sink. For ease of use, you can put the switch directly on the wire closer to the washer reservoir.
The switch can be used from a network night lamp. Add water to the tank as needed.
That seems to be all. At low cost, a good mini-wash was obtained for your car. All success in the work! Bye, see you soon.