Such legs are perfect for any kind of electronic homemade. In addition, they can be used as a kind of "bumpers", bumpers in drawers, doors, etc. The legs are quite soft, very light (less than one gram) and do not slip on the surface. Their color is universal black, suitable for cases of any color. The legs are made of polyurethane rubber.
The legs are supplied in the form of a plate divided into elements. The reverse side of the plate is sticky (3M tape, according to the seller, is most likely not original, but, in any case, the legs are held on it quite reliably). The size of each element is approximately 12.7 mm x 12.7 mm x 5.8 mm (base length x base width x height). The size of the whole plate is approximately 100 mm x 60 mm x 5.8 mm (L x W x H). Each plate has 40 separate elements.
Buyers note a sharp smell of rubber from the plate, but if it is divided into separate elements, the smell ceases to be so pronounced. In any case, if this problem is still embarrassing and you want to play it safe, you can pay attention to the silicone analogues of such legs. IN this lot they are presented in different variations of shapes and sizes.
Cost: ~ 104