In this article, the wizard will tell you how to make a longboard. do it yourself.
Tools and materials:
-Finishing Miniwax Wood;
-Oak planks;
-Rollers;
- Joiner glue:
- Clamps;
-Sandpaper;
-Computer with software;
-Grinder;
-Bandsaw machine;
-Painting brush;
-Spray-paint;
-A screwdriver;
-Scissors;
-Knife;
Step One: Design
If there is a ready-made template, you can use it. The master did not have a template, and he designed the board himself using the Fusion 360 program. He drew a sketch of the board, correctly positioned the rollers and the inscription.
Step Two: Board
The master cuts the boards to size. There are three boards in total.
Applies glue and clamps with clamps.
Step Three: Drawing
Drawing master cuts with the help of CNC machine. First on plywood, to check the settings.
Step Four: Cutting the Board
The workpiece is glued together and the master places it on the machine and cuts it according to the sketch.
Step Five: Sanding and Coating
Grinds the board.
Applies a coating.
Then it covers the surface around the picture and paints it.
Step Six: Rollers
Marks holes for the platform.
All is ready.