All of you are well aware of the damage caused by rats, mice, and other rodents to the house and household, as well as how unpleasant such "roommates" are. Especially these "comrades" are activated on the eve of cold weather.
In this article, the author of the YouTube channel "Mice TRAP 2020" will tell you how to make a simple but reliable mousetrap. This is not even a mousetrap, but a rat trap.
This homemade product is very easy to manufacture, and can be easily repeated even without a glue gun.
Materials
- Large plastic bottle for 19 liters
- Plastic cup
- Boards
- Grain.
Instruments, used by the author.
—
- The knife.
Manufacturing process.
So, the author found an old, damaged bottle. To begin with, he cut her neck with a hacksaw. Then he cut the plastic cup like this. These petals will not let out even the most thoughtful rat. But they jump much higher than the height of this bottle. Instead of a glass, you can use a piece of PVC pipe.
This insert is glued to the top of the bottle with hot glue, or fixed with screws or tape.
It remains only to fall asleep inside fixtures bait, and spread it around the neck. You also need to fix a couple of pieces on the sides of the trap.
So, in a few hours the master caught a couple of kilograms of rats. Such a trap will cope even with a very large room, and the rodents themselves can be released somewhere far away.
If your opponent is not a rat, but a mouse, then the size of this trap can be reduced and made from a 6-liter “eggplant”.
I thank the author for a simple but useful device for catching rodents!
All good mood, good luck, and interesting ideas!
Author video can be found here.