For the convenience of using a miter saw, the master made a special table. Folding side shelves allow you to rest on them long boards, and at the same time, do not take up much space. Also in the table there are boxes for all sorts of details, and wheels for ease of movement.
Tools and materials:
-Miter saw;
-Circular Saw;
-Bandsaw machine;
- Clamps;
-Wheels;
- Joiner's glue;
-Royal loop;
-Fasteners;
-Plywood;
-Conductor;
-A screwdriver;
Step One: Billet
The master cuts the plywood. To support the hinged shelves, there will be a trapezoidal part on each side. The master glues them from two blanks.
Step Two: Assembly
Further, the master assembles the tabletop and bolts the bottom of the platform with wheels.
Step Three: Shelves
Screws the shelves.
Step Four: Side Shelves
Fastens slats on both sides of the table (top).
Hangs side shelves on piano loops.
Screws on support. Also on the piano loop.
Step Five: Drawer
The master plans to put various trimmings in this box. The box is installed in the lower part of the case.
It remains to put a protective coating on the table and you're done.
