In this article, the Wizard will tell us how to make an interesting lamp from an ordinary trunk of an old tree.
Tools and materials:
-LED lamp;
-Tree trunk;
-Electric cord with switch;
- Spray bottle;
-Patron electric;
-Hacksaw;
-Small screwdriver;
-Glue gun;
-Drill;
-Sandblasting machine;
-Dimmer;
-Chisel;
Step One: Harvesting
First, the master went to the forest for suitable material. Need an old trunk with a half-rotten core. The master cleans the loose parts with a sandblast and a chisel.
Step Two: Sawing
Now you need to saw off the lower part of the trunk so that the upper part is firmly on the surface.
Step Three: Install a Chuck
Then the master drills a hole in the trunk and stretches the wire. Screws the wire to the cartridge. In the circuit, the master mounts a dimmer.
Step Four: Varnish
The cartridge is installed, and the master covers the barrel with varnish, having previously cleaned it.
The lamp is ready, it remains to screw in the light bulb.
