In this article, you will learn how to make a wine box, as well as how to bend wood and make a segmented door.
Tools and materials:
-Boards;
-Marker;
-Rule;
-Bottle;
-Glass;
-Miter saw;
-A circular saw;
-Hacksaw;
-Chisel;
-Hammer;
-File;
-Hammer;
- Joiner's glue;
-Iron;
-Grinder;
- Paint tape;
Milling cutter;
-Capacity with water;
-Scraper cycle;
-Clips;
-Metal round box;
-Finishing material;
-Fasteners;
-A screwdriver;
Step One: Drawer
A bottle and two glasses should fit in a wine box. With this in mind, the master makes the marking and sawing of the board.
Connect the parts using a dovetail. The wizard marks and cuts connections.
Step two: door and back wall
The master cut out the back wall from a solid board.
The door is segmented, made of stripes of wood. First, the master cut the stripes. Then he made a box of chipboard. He laid the strips in a drawer and jammed them with bars.
Apply wood glue to the strips and lay the fabric on top. Iron the fabric. After the fabric has stuck, you need to roll up the blank and deploy it several times. Then leave to dry when folded. In this state, even if the glue got between the strips, they do not stick together.
After the glue dries, the door surface is ground.
The master glues a handle on the door.
Step Three: Milling
With the help of a milling cutter, the master cuts out grooves for the door, rear wall, and also for shelves for glasses.
Step Four: Scraping
Using cycles, the master removes the top layer of wood on the details of the box. Such an operation gives a peculiar look to the wood.
Step Five: Feet
The legs of the box are bent. The master cuts out several strips of oak and soaks them in a container of water.
After 12 hours, the strips bend around a metal can and are fixed with clamps.
After another day, the master glues the strips by making two blanks.
Trim the end parts of the legs.
Putty with a mixture of sawdust and glue.
Cuts to the desired length and grinds.
Covers legs and shelves for glasses with finishing material.
Step Six: Build
Now it remains to assemble the box, install the door, legs and cover with finishing material.
The whole process of making a wine box can be seen in the video.