Today I want to show you an interesting model with a pushing screw, and her name is very beautiful Lady Bird.
The author suggests making it with a wingspan of 1 meter!
Personally, I liked this model because it is all-weather and does not require a special runway, it can take off from any surface. There is another significant feature of this model - you can install a motor with a screw on it, or an impeller. The design does not change.
The author, as usual, shows the drawings of the model from different angles and different options. Schemes and drawings.
The author builds his model from 6 mm depron and in some cases adds a second layer, for strength. Since we have a "tightness" with the depressor, it is possible to build from the ceiling or sheet, a simple substrate for a laminate.
The author shows the methods of bending of the depron (ceiling tile).
Markings are made and individual structural elements of the model are cut out.
The blanks are ready.
A groove for gluing the carbon tube is made in the stabilizer blank.
Before gluing the fuselage, the joints are adjusted and the whole structure is fastened after gluing with masking tape.
The fuselage wall reinforcement scheme is shown.
Grooves are made in the beams where carbon tubes are inserted to reinforce. Beams are made of two layers of depron (ceilings), can be strengthened with a third layer. All this sticks together.
In the workpiece of the lower plane of the wing, grooves are also made and carbon tubes are glued.
Trying on the fuselage.
Places for installing servos are being prepared. Rocking chairs, for connecting rods to ailerons, are bent from a 2mm wire. and glued into the prepared grooves.
Beams and a stabilizer are glued.
To give a profile to the wing, ribs are glued. The upper wing skin is mounted.
To be installed electronicsServo machines are mounted, wires are laid.
The fuselage is glued.
Pieces of the upper wing skin between the fuselage and the beams are glued.
Here is a kind of model at this point.
Set thrust on the launch vehicle.
A hatch is made into the battery compartment.
Ready model.
Covering the model with colored film.
Video of the first flight.
Friends, I don’t know about you, but I really liked this model and the construction process is not complicated. I will take the time, be sure to build by the summer.
On this I say goodbye to you.
Bye. Your valerian.