Good health to all!
I could not resist and decided, with particular pleasure, to show you how to build model one of the most beautiful airplanes and a tragic fate. This is the Concorde plane.
The author made beautiful drawings and promising drawings - plans, with a detailed image of all the basic elements of the design of the model.
Before construction, the author gives some practical advice on working with the material, shows methods of bending parts.
The author gives a visual illustration of an impromptu front pillar for this model.
The following photos show the manufacturing process of the moving nose of the fuselage of the model.
The motor and keel mount assembly is shown.
The author decided to show a manufacturing option for a model with a fixed bow.
The installation locations of the servos are determined.
Using a 2 mm wire staple and plastic tubing. elevons are hung.
Servos are glued in, traction is connected.
The wires are laid, the battery is tried on.
The motor is installed and connected.
All this is closed by the fuselage body.
On the underside of the model, such overlays are made.
Trying on and pasting the keel.
Boxes of motoblocks are glued.
The servo is glued on the pH, the traction is connected.
In the bow of the fuselage is a hatch for installing the battery.
Ready model.
Video of the Concord flight.
According to the author’s drawings, using his advice that he gave on the forum, during construction, another aircraft modeller built such a model and showed the video.
The author further shows his version of the manufacture of this model using impellers, but about this you can see the "source".
On this I say goodbye to you.
Bye. Your valerian.