This microphone stand designed and manufactured do it yourself the author of Instructables under the nickname jsawyer is perfect for amateur performers - from school ensembles, like the one mentioned in the song ChiZha (or not - forgotten), to, for example, bards.
For the manufacture of homemade the master takes a total of about 2.5 m of PVC pipe with a diameter of about 20 mm. Half of this length goes to the base, which will require the following details:
1. A length of pipe length of 200 mm - 1 pc.
2. The same, 150 mm - 2 pcs.
3. The same, 100 mm - 1 pc.
4. Tee - 2 pcs.
5. Angle adapter at 45 ° - 3 pcs.
The master collects the base and glues it with PVC glue. You don’t have to glue it, everything keeps perfect anyway, but if the tripod falls apart right on the stage during the performance, they will consider amateur performers to be amateur clowns.
The design, which the singers call the "crane", is somewhat more complicated, for its manufacture the master takes a total of about 0.6 m of a thinner pipe - 12 mm in diameter, as well as the adapters and fittings shown in the following photo. One of them seems to be specifically designed to clamp the microphone.
Next, the wizard shows the assembly order of the crane. FUM-tape is not necessary to use, nothing needs to be sealed here, just cut a thin plastic bag.
The master brings everything together:
Installs a microphone, and a tripod with it is ready to take amateur performers:
Even near such a tripod looks professionally executed, and even from the audience - even more so. It remains to adjust it in height - and you can protrude.