Partly an illusion, partly a serious bookshelf, it creates an effect that will make your friends and family try to figure out how all the books remain on it. Such an unusual inclined shelf is very easy to make. To do this, we need the following
Tools and materials:
- Clamps;
-Circular Saw;
- Jigsaw;
-Plywood;
- Holder for napkins metal;
-Sandpaper;
-Gon;
- Joiner's glue;
- Paint tape;
Grinding machine;
- Putty;
-Magnets;
-Hammer;
-Decoration Materials;
-Fasteners;
- Loops;
Step One: Drawing
The first step is the master makes a drawing of the shelf. Section shelves will be attached to each other at an angle of 90 degrees. The author has three sections, but any number can be added.
Step Two: Sawing
Next, you need to mark the material and make a sawing.
Step Three: Build
Now you need to assemble the shelf. The master applies glue to the mating surfaces and connects the parts. For fixing, temporarily, uses masking tape, then fastens with screws.
Step Four: Bracket
The bracket is needed to hold the extreme books in an inclined position. Three shelves. Each shelf will have one book. So there should be three brackets.
He makes them from a metal napkin holder. The holder is made in the shape of P. The master cuts it into two parts, and then cuts one part into three parts.
Cleans cuts.
Step Five: Attaching Brackets
Now you need to fix the brackets on the shelves. The wizard marks the installation sites, applies glue and glues the brackets to the sections of the shelf.
Step Six: Grinding and Trying
Now you need to putty the shelf in problem areas and polish it.
Next, the master installs the books on the brackets. The first book should be hardback. The bracket slips under the cover of the book. Then you need to find a position so that the cover does not open. If necessary, you can fix it with magnets, but, according to the master, they still hold.
Seventh step: shelf installation
The last step remained, fix the suspensions on the shelf, and hang it on the wall.
All is ready.
