An oscillating multi-tool is also called a "renovator." Will allow this device to perform work in an extremely limited space, where it is difficult to find a normal tool, and sometimes even impossible. For example, it is very convenient to remove paint and varnish coatings with this device without raising the dust that inevitably occurs when grinding the surface of angle grinders. At the same time, the appearance of the oscillating instrument resembles a “grinder” in many ways, but according to the principle of operation it differs significantly. So, the working part of the "renovator" does not rotate, but oscillates. In this case, the angle of oscillation is 2.8 °. It is possible to adjust the vibration speed (6 speeds) by rotating the wheel in the lower part of the handle. The tool is made of high quality plastic, the handle is rubberized.
The characteristics of the device are as follows:
• voltage: 230 V;
• power: 300 W;
• platform oscillation frequency range: 10000 - 23000 count / min;
• length: ~ 260 mm;
• height of the working part: ~ 100 mm;
• handle diameter: ~ 65 mm;
• power cable length: 2.5 m.
The tool kit comes with a branded storage bag, 3 saw blades for wood and metal, 10 grinding tips (P40, P60, P80, P120, P240 - 2 pcs each), Allen key, adapter for nozzles from Bosch , instruction in English. It is worth noting that the saw blades are designed to work with relatively soft metals, on hard “teeth” they will quickly erase.
Due to its compact size and light weight, the tool can be held with one hand. At high speed, the vibration is quite noticeable. In general, it’s a rather interesting device, but it’s important to understand that it is primarily intended for specific work and is a good addition to the rest of the tools, but not the main one.
Cost: ~ 2700