Surely almost all of you know about All Saints Day, called Halloween, and celebrated every year on October 31. And if you are going on this day to an event dedicated to him, then you can’t do without special effects. It is imperative to scare someone.
In this article, Dania, the author of YouTube channel "SuperCrastan", will tell you about a very simple, but very effective prank for Halloween.
Materials
—
- 12V battery
- wires
- Plastic bottle, foil tape
- Nipple for tubeless tires
- PVC pipes, plugs
- Hose trim
- Clamps
- Solder, flux.
Instruments, used by the author.
—
—
- Pump, screwdriver
— .
Manufacturing process.
As it should be for any more or less interesting project, you need to sketch.
As a matter of fact, the source of energy will be a small receiver made of PVC pipe and a pair of plugs. Air will be pumped into it through the nipple for tubeless tires.
A flexible connection to the solenoid valve will be made from the receiver using a hose and clamps.
After the valve, a hose is also attached, at the end of which a cone from the neck of the plastic bottle will be fixed.
The valve will be powered by a small 12 volt battery. It is important to observe the polarity.
The valve is connected to the battery, and two wires are left for the switch.
The receiver is filled with air using a high pressure pump up to 12 atmospheres.
The first test showed that this circuit is very functional. Matches scattered from the outlet over a very large distance.
Danya decided not to bother with the button, and simply make dry contact from the stripped wires, fixing them on the gun body with hot glue.
Contact is certainly not very reliable, but several times it is enough.
Before installing the main element, you need another health check.
Several lumps of paper are added to the cone from the plastic bottle, and a blood simulator is poured.After this, the neck is sealed with foil tape. Adhesive tape should tear easily.
Air is again pumped into the receiver.
All device fixed behind a t-shirt or sweater.
Before the “scare” itself, you need to make sure that no one is behind you, it is better if it is just a wall. Well, actually a "shot" is being made. To enhance the effect, in addition to the blood imitating fluid, you can add scraps of white plastic, it will create the effect of scattered bones. In addition, it is worth drowning the barrel of the gun for the reason that even with conventional pistons, small particles can get into the mouth.
Of course, this device can be made much easier using a standard firecracker with an electric fuse. Be careful, such things can really hurt others. It is also advisable to stock up on corvalol and valerian.
I thank the author for the idea of a simple but very effective prank for All Saints Day!
All good mood, good luck, and interesting ideas!
Author video can be found here.