In the age of computer and Internet technologies, information storage devices such as flash cards have tightly entered our lives, having a small and compact size can store tens of gigabytes of information.
A variety of cases are made for flash drives, both from plastic, wood, metal. But all this is a factory release, but a person wants to have a unique little thing)
So our author also planned to make an unusual case for his flash card, namely in the form of a "diving helmet". Well, let's carefully and in detail examine how he managed to do this and what was needed to create the case?
Materials
1. copper pipe
2. brass bar
3. copper wire
4. flash card
5. LED
6. wire
7. solder
Instruments
1. metal sheet
2. file
3. burner
4. pliers
5. hammer
6. glass ball and nut (for forming blanks)
7. sandpaper
8. vernier caliper
9. tap
10. drill
11. Dremel
12. pasta GOI and velvet
13. ammonia bath (glass jar with ammonia)
The process of creating the body of the flash drive "diving helmet" do it yourself.
And so, you should start with a short history of the appearance of the diving suit itself and the helmet itself. Man, by nature, is constantly searching for something and discovering for himself everything new and interesting in our world. Conquers mountain peaks and air spaces, as well as the depths of the sea. But without technical means, this would be hardly possible.
So for the development and study of the deep sea, a diving suit was invented. His first samples were rather bulky and heavy, here is an example on (photo) Air in such a suit was supplied through a flexible hose attached directly to the diver's helmet. Air was pumped through the air duct using a compressor. Having become acquainted with the history and carefully studying the presented samples, the master set to work. First of all, the author took a copper pipe (from the air conditioner) and sawed off the piece he needed, sawed it along and straightened it. The resulting plate must be burned with a burner, so the copper will become soft and supple. The master touches the shape of the blanks with a glass ball and nut, tapping with a hammer.Here is the result.Next begins the creation of the helmet.
This concludes the article. Thank you very much for your attention!
Come visit often, do not miss the latest in the world of homemade goods!
This article is for informational purposes only!