In this article, the master will share with us advice on how to install a flashlight on almost any instrument or object to illuminate dimly lit places. Moreover, this flashlight is removable, it can be removed and put in another place. It can be rotated left / right. If the item on which you want to install a flashlight is metal, then no additional steps are necessary.
The master will show on the example of installing flashlights on the arms of goggles.
So, we need: glasses, a flashlight keychain, neodymium magnets, wire cutters, a marker, Sugru. What is Sugru? According to the manufacturers, this is “plasticine rubber” or “molding glue”. It is packed in bags. If the package is opened, then it begins to harden in the air. With it, you can repair, or even sculpt various shapes. Of course, her price is not small, but in China they are already releasing an analogue of Sugru, at a lower price. I think that for the implementation of this project, you can also use glue or cold welding.
First, the master removes a metal chain with a ring from a flashlight trinket.
Opens a Sugru sachet. Knead a couple of minutes of contents. Rolls up four balls.
Glues two balls on one side of the flashlight, opposite to where the power button is located.
Next you need to mark the magnets. Those. identify their poles.
Glue magnets to the flashlight. The magnets must be aligned at the same poles in one direction. Now you need to leave the flashlights for a day.
Now go to the points. They need to do the same operation, only place the magnets up with the other poles.
After a day, you can use the backlight. Light can be directed in any direction, removed and fixed on any metal object.
There are already glasses with backlight on sale, but it is fixed, it shines only in one direction.
Here are some more examples of such a life hack.
As you recall, half the mass of Sugru remains. Her master uses to rubberize the temples.
All is ready.
