- packaging wire from champagne;
- scissors for biting wire.
Snack with a pair of scissors (or nippers) the ring of wire in the place of twisting, this piece of wire will be needed for the back of the future highchair.
Remove the ring of wire from the stitches of the future legs of the stool, and here's what happens, see the photo:
Straighten the ring of wire and form the back of the chair, as shown in the photo. If necessary, remove excess wire at the ends of the backrest.
Screw the wire back to the legs of the stool.
And the last touch - open the legs of the chair a little and insert the lid. Done!