If you do not have enough space for the knives on the shelf, or if it is not possible to put them in a safe place, then this article is just for you ... In it I will tell you how I can do it myself home conditions to make a magnetic holder for knives ...
What we will try to do today can be called in different ways: “magnetic holder” or “magnetic board” - there is no difference ... As they say: “whatever you call a yacht, it will sail!)))" .. And, by the way, this magnetic holder can be used not only for knives, but also for any metal things with a small weight, the main thing is that the metal is attracted to the magnet (by this I want to say that, for example, you "hang" aluminum on magnetic the holder cannot ...
So, let's start manufacturing.
In order to make our magnetic holder we need:
- old unnecessary computer hard drives;
- a screwdriver with a set of removable heads;
- double sided tape...
To begin with, using a screwdriver and appropriate heads, you need to completely disassemble the unnecessary hard drives ... Their sets of parts that make up the hard drive, we need only magnets ... But do not rush to get rid of the remaining parts, because they can come in handy in everyday life or same for new homemade...
Now carefully glue the double-sided tape to the magnets, and cut off the protruding parts of the tape (that is, we make a neat kind of magnet) ...
After that, we peel off the protective film of the adhesive tape and glue the magnet to the surface on which you are going to hang knives or some other metal device light weight ...
Well, that’s the principle and that’s it ...
The magnet holds well on a vertical surface without falling due to the adhesive tape, but if you want the adhesive tape to leave no traces on the surface, you can use special mounts that can be purchased at any building materials store ...