Today in this article I just want to tell you about how you can speed up and increase the number of fish caught. I want to share with you a “recipe” for making a toad.
Zherlitsa is a fishing tackle adapted for catching predatory fish, such as, for example, pike, perch, catfish and others ... As you know, predatory fish like to eat something like their own, that is, fish, so you need to fish for live bait in this way. There is a variety of girders: both summer and winter girders.
In this article I will tell you about the summer zergel.
So, let's begin.
I will begin my story about the manufacture of this fishing tackle by explaining what things we need.
So for our crafts we will need:
- a small stick (it can be either wooden, or from any other dense material). I used a metal-plastic inch pipe;
- adhesive tape;
- scissors or knife;
- lace or a small rope;
- plastic bottle;
- a piece of fabric.
So, let's start manufacturing ...
To get started, take a plastic bottle (I took a 1 liter bottle) and cut off the neck of the bottle ...
Next, carefully using scissors, make a cut in the neck at an angle of 15-20 degrees, as shown in the photograph ...
The resulting tip is bent at an angle of 45 degrees into the neck ...
Next, we attach a bottle cap to our wooden or other stick (to its end) using a cord and scotch tape ... Of course, it is advisable to use a swivel - a device that helps to prevent twisting of the fishing line, but if there is no such fixtures - it doesn’t matter, let’s get by with the means at hand ...
Next, take a small piece of cloth or a plastic bag, apply it to the neck of the neck and fix it all with tape ...
Now we need to fix the fishing line ... It is inserted into the neck and passed through the cutout in the thread and then gently screw the neck onto the lid fastened with a rope ... By the way, you must make a hole in the lid, put a rope or cord there and tie it from the opposite end of the lid ( this is done so that the lid does not "fly off" from the lace ...
We got a very strong device that can withstand the resistance of predatory fish ... Next, we collect a plastic bag or cloth in an accordion and wind the fishing line as shown in the photo ...
We leave about a meter and a half fishing line and fix it in the neck section, which we did at the very beginning ...
Now it remains only to attach a weight and a hook to the fishing line, on which you will put live bait as a bait ...
That's basically it!
Now I’ll tell you how it all works ... So, you go fishing, fix this shelf with one end to the bottom of the reservoir, and the other end sticks out, then the predator swallows your bait in the form of live fish and pulls it along without feeling resistance ... In this while the fishing line is unwound and the plastic bag is also unwound (this is a signal to the fisherman that the predator is caught), and the predator continues to pull the fish ... As soon as the fishing line finishes unwinding, it rests and thereby automatically cuts the predator that has completely swallowed your bait ... More fisherman pulls the line and pulls the trophy! That's all!
Have a nice fishing!