Home-made washstand in the country

Today I want to tell you about how you can do it yourself in home washstand ...

To begin, I suggest you watch our video homemade:



It happens that, for example, in the country or in the garage there is no running water, and you need to wash your hands, and you have to think how to do it so as not to smear everything around ...

In this article I want to tell you how you can make a washstand yourself at home and from home appliances ...

So, let's begin...

For our future washstand we will need:
- a wooden beam, about 1.5-1.8 meters long;
- multi-liter bottle or canister (plastic);
- wire;
- syringe ...

So, first we cut off the wooden beam of the desired length and drive it into the ground ...

Next, using a wire, we attach a multi-liter bottle or canister upside down to a wooden beam ... We cut the bottom of the canister on three sides to get a kind of lid that will close ...

Next, we take the syringe, pull out the piston and carefully cut off part of the syringe barrel at an angle ... We will put the piston into the cylinder from the cut side ...

Next, make a hole in the cap a little less than the diameter of the syringe barrel ...

Gently push the syringe barrel through the hole in the cover and put the piston in there ...

Now we wrap the lid with a syringe on the canister and pour water into the canister ...

The piston in the cylinder of the syringe acts as a valve ... Now if you want to wash your hands, then you just need to slightly raise the syringe piston with a slight movement of your hand ...

Good luck ...