» Furniture » Tables and chairs »DIY do-it-yourself folding table

DIY folding table

DIY folding table

Did you know that from the most ordinary cardboard, you can build indescribable beauty, objects. And such is the table. It will look like it is made of leather or wood. Moreover, it can be laid out. Perhaps such a table will fit, absolutely, into any interior.

Step 1



The first thing to do is draw the legs on paper and cut it very carefully. Moreover, their shape can be very diverse. But it is important to consider the fact that the thicker the legs, the stronger your table will be.

Step 2




Next, what you need to do is to assemble, literally each, of all the supports. And it is advisable to start this process from the center.

Step 3


Next, fill the grooves in parts. Remember that both height and width, without fail, must correspond to each other.

Step 4
But in order to quickly connect all the elements, it is necessary to apply glue that dries, also very quickly.

Step 5

And only then, after complete drying, glue the side areas of cardboard, literally to each of all the important areas of the supports.
Do not forget about the hole, which is necessary so that you can also extend your table. All additional parts of your table are also attached to the glue.







Step 6



After everything dries well, if desired, the design can be painted.
10
8.5
10

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose

We advise you to read:

Hand it for the smartphone ...