» Fixtures »DIY PCB knife handle

DIY PCB knife handle

DIY PCB knife handle

If it happened that your knife was left without a handle, then do not rush to throw it out. This thing is fixable. You can make such a pen quickly and easily.

To make a knife handle you will need:
• Wood, or textolite.
• Special hacksaw for metal.
• Drill.
• Emery paper and a pair of bolts.

If you have an original part from a pen, then you can use it, or draw a template by eye.






After that, apply the picture to the tree, or textolite and cut it out.

Next, make small holes in the finished workpiece and it is through them to fasten the new handle with a knife by screwing it with bolts.








At the end, the entire knife can be processed with sandpaper.












That's all. The new handle of your knife is ready to use!

10
10
10

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose

We advise you to read:

Hand it for the smartphone ...