Making a cheap air rifle

Fans of air rifles and homemade I’ll definitely like this material, because in it we will review the video on making a homemade air rifle, which, according to the author, will cost only $ 5.

Let's start making a rifle by watching a video



So we need:
- wooden block;
- tap for watering water;
- steel plate;
- drill;
- drill;
- bolts;
- nuts;
- wire;
- pin;
- spring;
- Super glue;
- nipple;
- plastic bottle;
- a hose for the pump;
- PVC tube

Let's start by making a small indentation on a wooden block.

We take a crane for watering water and a steel plate. We make four holes on the steel plate.

We attach a steel plate to the faucet handle with bolts and nuts.

Then we take another bolt, insert it into the plate and fix it with two nuts.

Now we take our faucet and attach it to a wooden block using wire.

Care must be taken to ensure that the opening and closing of the tap valve is automatic. To do this, take a clothespin and fasten it with a self-tapping screw so that it fixes the bolt, which we secured to the metal plate with two nuts.

After that, take the spring and fasten it with one end to the upper edge of the metal plate. We fix the second end anywhere: the main thing is that when the spring is closed, the faucet handle is open.

Thus, when you click on the clothespin, the bolt is released, and the faucet handle opens sharply.

Now we make two holes on the extreme part of the bar and fasten the pump to it with a wire. The pump will also act as a handle.

We take another faucet, cut off the nose from it, drill a hole in the lid of the plastic bottle and glue the nose to the lid with superglue.

Now we take the nipple from the bicycle chamber and attach it with superglue to the plastic bottle, making a hole on it.

Next, take a hose for the pump and wind it on the nipple in the bottle.

We drill a hole in the bar so that a tube with a nipple comes in and glue the bottle to the bar.

Next, take a hose and fasten it with one end to the bottle and the other to the spout of the faucet.

After that we take the PVC tube and fasten it to the other edge of the faucet.

Air rifle ready.