Quite often those homemadedesigned for fishing, are very better and more effective than those sold in company stores. It is this fact that prompts the idea to make everything with your own hands.
In order to make such a homemade product, you will need:
• Housing from an ordinary helium pen
• A plastic tube or you can take PVC.
• A few common pins
Step 1
First, remove the tip from the base of the case, and with it the top cap.
Step 2
Trim and grind all the details together. Once they are adjacent to each other, fix them with ordinary glue.
Step 3
Cut a few pieces from a plastic pipe, the length of which should be no more than 6 millimeters. Now, gently round all the ends.
Step 4 Next, insert the pin inside the piece, pre-lubricating it with glue.
Step 5
Remember that the capacity of the float will be about 0.4 grams. It is very durable and at the same time, does not undergo any deformation.
The process of creating a float is very simple, so try and you will surely succeed. The main thing is to do everything according to the instructions and only a little, you can deviate from them. In any case, there is nothing complicated.