Merry Christmas and a Happy New Year to all) I will tell you how to cool our PC as much as possible.
Brief information
I know that some people value their old PCs very much, and try to improve it by any means, i.e. overclock the processor or video card, this is an article for those same people as me)
Watch the video:
Step 1 - Getting Started.
What do we need in this case
- 2 regular coolers from PC
- 1 button, can be taken from the old power supply
- A pair of bolts and nuts
- Front plate from the body
- And of course, a smart mind and straight arms.
Go)))
Step 2 - Cooler
The photo shows coolers and how they are fastened. Do the same and be sure to leave a gap of about 30 or 50 mm between them.
This is necessary so that they both function normally and do not hurt each other.
Step 3 - Buttons
Make a slot on the front bar in order to insert the on and off button for the additional cooler, increase the wires so that they reach the wires from the cooler.
Step 4 - Installation
Cut the red wire from the second cooler in half and fasten as shown in the diagram
Insert the cooler into place, assemble everything and fasten it as it should))
Step 5 - Verification
Well, we will not check the performance of coolers, we’ll better see the indicators, either in the BIOS or the EVEREST program.
See the photo, the first photo shows the computer working with one cooler and the emulator turned on. The processor is loaded and heated, and during games the temperature is up to 70 degrees.
And in the second photo the CPU temperature has already dropped a lot, and in games we have up to 55 degrees)
Well, that’s all) I would be with you, wait for new articles))
Till))