» Computer DIY »Amplification for Wi-fi adapter with available tools

Amplification for a Wi-fi adapter by improvised means


Thanks to improvised means you can in home conditions amplify the Wi-Fi signal of the adapter. No rare materials are needed for this, and a makeshift amplifier is made rather quickly.

We will need:
- Wi-Fi adapter;
- a metal plate with slots;
- USB extension cable;
- a tripod;
- laptop (from the author of the lesson HP DV1000);
- glue.


Step 1

First, cut a rectangular hole with a sharp knife in the center of the metal plate. Cut out? Then proceed immediately to the next step.

Step 2

Insert the USB extension cable into the hole, glue the connection point with glue for reliability.

Step 3

Connect the Wi-Fi adapter to the glued extension cable connector.

Step 4

Now the author made a small hole in the plate for a tripod.

Step 5

The top of the tripod is inserted into the slot. The photo shows how the design should look.

Step 6
The second extension cord connector is connected to the laptop.

Now it remains only to test the speed and signal strength of the Wi-Fi Internet - you should now have them higher!
7
8
5

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose

We advise you to read:

Hand it for the smartphone ...