Making a powerful wind gun

Wind guns are used in tribes for hunting and self-defense. Such a gun can become not only entertainment, but also a beautiful decorative element, so we decided to devote this article to a review of a video on the manufacture of an air gun.

Let's start by watching the author’s gun manufacturing video.



So we need:
- polypropylene pipe 1 m long;
- electrical tape;
- glue gun;
- adhesive tape;
- pieces of dense foam;
- paper stickers;
- laser;
- plastic clamps;
- nails.

First you need to wind one end of the polypropylene tube with electrical tape.

Next, we take plastic clamps, which need to fix the laser on the tube. In the absence of clamps, you can use tape, tape or glue.

According to the author, the most important thing is to make the right cartridges, since the accuracy and power of the shot will depend on them. We take a paper sticker and give it the shape of a cone.

Then we take the adhesive tape and cover the upper part of the cone so that the sticker does not unwind.

Now take the cone from the sticker and insert it into the polypropylene tube. Press lightly, pull it out and we can see that there is a strip left on the cone. Need to cut the cone in this strip.

After we cut off the upper part of the cone, which was superfluous, we insert a small piece of polystyrene into it and pierce it with a nail.

Pour some hot glue on top. The author of the idea advises using hot glue, since it will make the dart more stable and durable.

Now you need to start making a dart magazine. To do this, take a piece of polystyrene and cut out small rectangular pieces.

We attach the cut pieces of polystyrene to the tube with tape. Attach pieces of foam to the tube in a circle.

We take an insulating tape and wrap around. This is only necessary to give the store a more aesthetic and beautiful appearance, so you can skip this step if you wish.

After such simple actions, the air gun is completely ready.