Make in home The conditions of a budget tattoo machine are very simple. This article will discuss how to make such a machine at home from improvised materials.
To make it you will need:
1) Motor
2) Old ballpoint pen or automatic pencil
3) Guitar string
4) Electrical tape
Let's start with the motor. Any of the old ones will do. e children's toys, who do not know, that's how they look.
Further, the author used the old auto pencil.
We throw out all the insides from it.
To fasten the motor you need to use something strong. A spoon was taken. From the spoon we need only the handle itself. We bend it in the shape of the letter G as shown in the photo.
Next, we take the body from the pencil and wind up our pen with electrical tape, we wind it firmly and reliably.
Now we fasten the motor. On a motor of children's toys, there is always a small plastic gear on the shaft. You do not need to remove it, on the contrary, you need to glue the button with this super-glue on the button as in the photo.
Now you need to take the string and insert it into the body, bend one end and insert it into the button.
Now almost everything is ready, it remains to supply power to the motor. To do this, you can take batteries or use a power supply with adjustable voltage from 3-12 volts. For convenience, you need to put a switch or a power button.
Well, that’s all, our device is ready.