In one of the previous materials we presented block onion video review. In this article, we will review the manufacture of a crossbow using this bow.
We advise you to start by watching the author’s video
What do we need:
- homemade block onions;
- wooden block;
- trigger;
- wooden blocks;
- laser pointer.
The first thing to do is shorten the shoulders of a block bow. This will increase the power of the shot without the need to add springs.
Next, you need to start manufacturing the trigger. The author of the idea does not share the process of manufacturing the trigger, however, shows it in the context, promising to present the production in the next video. We will add from us that we will follow the release of this video and will definitely show the manufacture of the mechanism.
Next, we make a notch on the bar.
Cut a small part of the recess to the size of the trigger.
We also mark the locations of the mechanism openings on a wooden block to find out where it is necessary to drill for fixation.
Now we fix the guide board on the shoulders of the crossbow. To do this, the author uses an additional design of two bars attached to each other.
We attach the guide to an additional design.
If desired, you can add a butt and a laser pointer to the crossbow, which will act as a laser sight and increase the accuracy of the shot.
