» Furniture » Tables and chairs »Coffee table" stop "from a traffic sign

Coffee table "stop" from a traffic sign

Coffee table

Would you like to make a unique bright youth table? Then we are pleased to present you detailed instructions.

This is a simple option for making a coffee table, which can be done with the old stop sign.

Step 1: Choosing the basis of the table



To do this, you need plywood made of birch, 1.9 cm thick. Find the center by drawing diagonal lines from each corner.

You will also need blanks for legs (6 pieces), in this manual half-finished parts are already used. See the photo.

Step 2: Cut the pieces


We cut out all parts with a band saw and a jigsaw with small teeth.

Step 3: Cleaning and preparing the wooden parts




Grind all parts with 220 grit sandpaper.

Step 4: Clean and Prepare the Sign



Make holes around the perimeter of the sign. Use a drill bit (bit) 0.23 cm.

Roughnesses remain on the reverse side, they can be corrected again using sandpaper or a grinding machine.

Step 5: Finish Working With Wood Parts


We pass all the details with 220 grit sandpaper, and then varnish twice, let dry.

Step 6: Installation



Putting the table together. We glue the legs with the lower shelf and countertop, attach the “Stop” sign and fix it with bolts and a drill.

Step 7: Variations

Instead of the Stop sign, you can use other traffic signs, as shown in the photo.

A bright coffee table that will delight your eye every day is ready.
10
10
10

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
2 commentary
Specifically, this one - judging by the two holes, is clearly used, torn from the fasteners. As an option, ask the road workers if they have old signs that they exchanged for new ones (if the sign is bent, they can give it away). With the help of a mallet and someone's mother, the sign can be brought into a quite presentable form.
And where to get this most road sign?

We advise you to read:

Hand it for the smartphone ...