We offer another type of table that fits perfectly into your interior.
We will analyze in stages what we need to create it.
Alternatively, you can ask the staff of wine shops or restaurants, or refer to the proposals of the Network.
We select materials
• 40, 80, 120, 240 grit sandpaper. Matte black paint
• 3 or 4 bus bolts with washers and nuts
• small nails
• hammer
• clamping device (teski)
• pieces of cloth (will be used as rags)
• wood varnish
• milling machine
Step 1: marking the table legs
This version of the table on three legs. We make a mark on the planks, marking where the legs will be.
Step 2: Remove Axis Mounts
At the fastenings of the base of the barrel, remove the bolts using a milling machine.
Step 3: remove the rim and paint
We remove the two upper rims and paint them with black spray paint (it will be more convenient to suspend them). You can also paint and bolts.
Step 4: Sanding the surface with sandpaper
The instructions use 4 different types of sandpaper (you can limit yourself to 2). We advise you to bring your children / nephews / sisters or brothers to this process. Together more fun.
Step 5: varnish the barrel
Apply varnish to the entire surface.
Step 6: Getting Started Creating a Table Base
We put the rim on the barrel.
Step 7: make the legs
We retreat from the surface of the barrel 5-10 centimeters, drill 3 holes at the same level around the perimeter of the barrel and use a jigsaw to cut away unnecessary parts, do not forget to leave 3 strips that will serve as legs.
Step 8: Install the second ring
We fasten the rim to the table with 3 bolts.
Done!
