The presented instruction will help in creating an interesting shelf, similar to a honeycomb. Perfect for storing softback books.
Materials:
• One large sheet of chipboard (0.63 cm thick)
• glue
• Primer
• paint
Instruments:
• Table saw
• Clips
• brushes
Cooker preparation
Clean the surface of the stove to go to the next step.
Crop surface
Set your saw at an angle of 90 ° and make several parts measuring 12.7x0.95 cm.
Cooking Shelf Tiles
Change the angle on the table saw to 60 ° and cut the surface. Set the saw width to 5 cm.
Turn the plate over so that the corner is on the opposite side. Angles should be 30 °.
Cut six separate 7.6 cm strips from this part. Turn it over again so that the angle faces the opposite side, the angles should be 30 °.
Glue smaller cells
Glue the parts together with glue. Attach them to each other to make sure they are even. Let the glue dry. After the first pairs are glued, glue the remaining parts.
Start gluing separate sections
Now that you have a mini corner shelf, you can start gluing, following the same principle as indicated in the previous step.
Glue the corner sections
After you make six tiles, glue them to make the first hexagon. You should get 5 pieces.
Grind and paint
Sand the surface with sandpaper, wipe with a dry cloth, and then paint the finished shelves in the desired color.
A small bookcase in the form of honeycombs is ready. Now your books will gain a permanent place.