Own tracked all-terrain vehicle "Thomas" Vatar from the city of Verkhnyaya Tura of the Sverdlovsk region made rear-wheel drive.
He writes about this on the forum of the website.
Pokatushki on winter snow. video.
All terrain vehicle made on the basis of a donor VAZ-2101.
The frame is welded from a profile pipe 60x40x2 mm.
The movable axles of the support wheels of 6 pcs are welded to the frame, spring-loaded with shock absorbers from the Ural motorcycle.
The rear axle is used for differential steering. The drive sprocket and idler are raised from the axis of the support wheels.
Track tension mechanism.
Leading sprocket, star diameter is 240 mm and width -140 mm.
The engine from the VAZ-2101 along with the clutch and gearbox.
Hubs homemade, disc braking.
Caterpillars are made as on the Yukon, the track pitch is 105 mm.
Gear shift mechanism homemade.
Suspension sprung and with shock absorbers.
Dimensions: track width 1860 mm, length 3200 mm, height 1140 mm, ground clearance 400 mm, track width 415 mm.
The rear axle is scalded in a box.
Wheels used R13 175x70, pressure 2.2 atm.
Replaced the gearbox and took out the muffler.
Set the seat.
Another run-in. video
Removing the support wheel.
Wheel flange.
The layout of the cab.
Track rollers suspension system.
The machine is ready for all tests.
All videos from the creator of "Thomas" here.
Thomas is in new hands.
Good luck to Wataru in the construction of all-terrain vehicles.