The tank was built for three years to participate in military reconstruction of battles.
The performance characteristics of the T-60:
The engine from the car "Oka".
The bridge leading from the Ford Scorpio car.
The differential rotation.
Brakes on the leading sprockets from the VAZ-2108.
Drawstring cable.
Torsion bar suspension.
The caterpillar is made of conveyor belt, and the tracks are similar in appearance to the original ones.
Steel welded rollers.
There are no airborne ones, a decrease in speed is necessary, since movement at the 1st and 2nd speeds.
The gun is gas, propane.
The frame is welded from a profile pipe, the axles of the track rollers are cut into the body.
Track rollers on torsion bars from the KAMAZ spring, dissolved along three parts.
The bottom is scalded with iron.
Track rollers planted on the rear hub of the VAZ-2108. All rollers are metal, welded.
Inside the frame, an engine from Oka is installed.
The caterpillar is assembled on a conveyor belt, the fangs and tracks are made as on the original T-60 tank, the guide fangs are made very high quality, there have not been any
caterpillar descent.
Lugs are made as on a T-60 tank.
The chassis consists of a drive sprocket, a driven wheel, four support wheels and three support rollers.
Photo of the T-60 tank.
Transportation of the layout of the T-60 tank on a trailer. video.
Running in.
The torsion is simply welded by welding and if there is a need to replace the torsion, it is simply cut off by a grinder.
Suspension is visible when moving through a funnel.
The T-60 tank is involved in the reconstruction of battles.
Video reconstruction of the battle through an optical sight.