Good all-terrain vehicle it turned out.
Departure of the all-terrain vehicle before the tests. video
The performance characteristics.
The engine from the VAZ-2106 or the backup version of Toyota 1C-diesel.
The bridge from the VAZ-2106.
Gearbox (gearbox) from the VAZ-2106.
Transfer box from GAZ-69.
The hull is impervious.
Caterpillars on a tape 13 mm thick.
A little bit about equipment the garage.
Welders.
Air compressor.
Jack.
Workbench and drill.
Device for cutting strips from the "Bulgarian".
The device for bending the fangs-limiters for the tracks.
Form for fangs. (punch)
The process of building an all-terrain vehicle.
Ready fang for the caterpillar.
The number of fangs is increasing. Oil is used as a lubricant.
It takes 30 cm of strip to make fangs.
Fangs are made.
Fangs crack without lubrication.
The process is long and tedious, but you have to go through it.
We saw the base for fangs.
Sawed a whole mountain.
The base is welded to the canine.
Jig for fang base welding.
The moment of cooking the fang.
It seems that the dreary and monophonic work on the manufacture of limiters is coming to an end.
Truck after attaching a fang to it.
Fangs are painted.
Lugs are welded to the track.
One caterpillar is ready.
The second caterpillar is ready and rolled up.
Two rear axles are prepared.
Clutch cover and gearbox (gearbox).
The hull of the boat is brewing.
The front of the boat.
The case is reinforced with cross members.
The hull of the boat stands on wheels.
Drive hub with caliper for disc brakes.
Stiff suspension chassis. The axles of the support wheels are welded to the body.
The axles are reinforced with scarves.
The entire chassis is reinforced with scarves.
Windshield installed.
The engine took a stern.
The fuel tank has taken its place.
The caterpillar is dressed on wheels.
Cardan shaft for connecting the transfer case and the drive axle.
Steering column.
The driveshaft is welded. A homemade propeller shaft is installed on a self-made car.
The engine is assembled in place.
Engine before installing the radiator.
Engine with a three-row copper gazelle radiator.
The racks are reinforced with scarves.
The engine of the VAZ-2106 with a clutch and gearbox.
Cardan shafts are assembled.
Iron more and more on an all-terrain vehicle.
All-terrain vehicle cabin.
The winch takes its place.
The final appearance of the all-terrain vehicle.
Headlights installed.
Weight Limit car making It turned out 1060 kg with a full dressing.
Test drive on GSK. video.
Unloading an all-terrain vehicle. Very interesting solution with a cabin. video.
Alexander is currently working on another project. We are expecting good news from him about him. homemade.