In terms of dimensions, the Pchelyonysh motorcycle must enter the Niva trunk. Alexander writes about his auto-make on the forum site "Technoforum.com" under the nickname "BALAMUT36".
Departure for fishing. video.
Crawler mover of conveyor belt. Cart from the profile. The axles of the support wheels and the axis of the drive sprockets are welded to the trolley.
The length of the cart along the axles is 685 mm.
The caterpillar is dressed, but not tight.
Here the caterpillar is stretched. The caterpillar is pulled by the leading sprocket. A shaft with sprockets is inserted into the inside of the track and attached to the frame.
Caterpillar manufacturing. The caterpillar is cut in half along the wave. Inside the cord there are fiberglass inserts that are cut in half. To connect, you need to drill holes so that they do not fall into the raceway of the track rollers and connect with U-bolts (Brackets).
A platform with a Lifan engine with a power of 6.5 hp is attached on top of the mover’s frame.
The drive to the drive sprocket is fed through a chain drive. The chain is pulled by a roller. Gear ratio 1: 7.
The first exit on horseback. video
Slow motion.
Procurement of body parts.
The upper part of the frame is attached to the trolley.
The frame handle is folding.
Crawler motobux "Bee" ready for use.
A good technique, but it still needs a car in the back.
Skis are made of plastic pipes with a diameter of 280 mm with a wall thickness of 20-25 mm. The width of the track exactly matches the width of the track-380 mm.
A seat is welded for skiing, and under the seat there will be a box for fishing equipment.
Winter break-in.
Removable seat.
"Bee" freely fits into the luggage compartment of the car "Niva".
The tailgate closes freely.
Inside view of motobuks.
During the run-in flaws got out. The staples broke. I had to redo it.
Tape in a redone form.
Test train. video
"Dog" with the owner.
Now go fishing to the Don.
Good luck to Alexander in the construction of car models.