Introducing you model ATV 4x4 with all-wheel drive, which is designed to conquer the vastness of the terrain. This model was designed by assembling a variety of components, assemblies and parts of automotive equipment from different manufacturers and brands - these are both domestic and foreign models. The ATV is assembled on the basis of the OKA motor vehicle.
Technical characteristics of the assembled model of an ATV:
-parameters of width 1 m 55 cm, base 1 m 60 cm;
-height parameters from the steering wheel 1 m 30 cm, from the seat 90 cm;
-height clearance 43 cm;
- weight 390-410 kg;
-Put engine from OKA;
-Installed axle gears from Mitsubishi;
-Rear and front steering knuckles and hubs from the Niva;
-use of the drive from the Niva;
-Front and rear suspension mounted on double levers;
-Torsions and springs are used as elastic elements;
- Power steering from Subaru;
- Inter-axle and inter-wheel differentials are blocked.
ATV assembly step by step
1. Cook diagonal struts-amplifiers with a lever. Pipe F21x4.
2. the suspension has 4 levers, 1 lever for 2 = 16 units;
3. Turning according to the drawing of the reducer adapter. Centering and balancing.
4. Assembly of levers of suspension brackets.
5. Used steering rack, in particular the control valve, from Tayota, turning the gear, put on the cardan, insert in the context of the steering shaft. Thanks to this, we have a tight connection.
6. The ear is welded. hydraulic cylinder to the bipod, having one side to the frame, and the other to the traction.
7. The use of power without changing the design.
8. We shorten the cylinder for compactness to the necessary sizes.
9. Setting the front suspension, the next step is the elastic elements.
10. We use springs from the Urals complete with shock absorbers, installing 1 pc on the front axle. on the wheel.
11. Torsion front and rear suspension, and other details according to the drawing.
12. The transmission is almost assembled, the next step is the completion of the external frame.
Having finished, according to the design drawings, the assembly, we form and make the design. Very interesting, but painstaking and lengthy work.