Hello everyone, dear friends, today I will show you the idea of how to make a stand for better cooling of the laptop. Often laptop owners are faced with such a problem that the laptop quickly overheats when lying on the couch. And today we will make a stand so that the laptop cools better. Such a stand is not difficult to manufacture and it will take a little of your time to create it.
Necessary materials and tools:
- plywood
- jigsaw
- bar
- stain
- varnish
- self-tapping screws
- sandpaper
Step 1: First we take plywood, with a thickness of 8-10 mm. And we cut out two blanks according to the drawing.
Step 2: Next, I cut the Apple icon out of paper. He transferred the drawing to plywood, which is slightly smaller in width.
Then he drilled holes for a jigsaw, and cut it out. You can cut any icon, it all depends on your imagination.
Step 3: Then we take a bar 410 * 70 * 20 mm in size. And grind the side at an angle.
Step 4: Sand all the blanks with sandpaper and cover them with a stain. Need to cover all sides.
Step 5: Then we begin to collect the details. In the beginning, you need to drill holes with a drill, and then tighten the screws, otherwise the plywood will begin to crack.
Step 6: We varnish the product and the stand is ready for better cooling of the laptop.
