Hello everybody. Today I will tell you how to make a 6 volt solar panel in one hour. At the base of the panel, I took 15 by 15 cm ceramic tile.
I made silicone beads to prevent the epoxy from leaking.
The modules I used are 5 cm by 2 cm in size, they are at a voltage of 0.5 volts. All modules are soldered in series but one half is rotated 180 aboutWith before pouring resin and soldered on one side and the other leads are connected to the load.
Put the ends inside and stick another tile on the silicone - this will protect the conclusions from moisture. I took 90 g of resin and added 30 g of hardener. Poured it all into shape.
When everything was dry, I glued another tile to the back. He hid the wires between them. I made this module for a 6 volt charging module.
Here's what happened. Ceramics acts as a radiator.
Thank you all for your attention.