» Electronics » LEDs »LED lamp in the garage

LED lamp in garage


Viva friends.


Found in the garage the old ceiling and decided to remake it into LEDs and hang over a table in the garage.

To do this, I need:
Shade
Two 10W LED matrix ()
10W driver (you can buy a driver)
Hot glue
Wires.
Soldering iron.
Aluminum housing from an old electric motor.
Self-tapping screws.

I solder two matrices in parallel to the driver.


Then I glue them with hot-melt adhesive on the aluminum case from the old electric motor found in the garage. This will serve as a radiator for me and will remove heat from the LED matrices.

I put the whole structure in the ceiling and screw it with screws.


The lamp is ready.


I turn it on.


This is what it looks like in the garage.


The lamp turned out at 20 watts with LEDs, the light is bright, it illuminates very well.
Thank you all for watching
.
8.5
7
8

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose

We advise you to read:

Hand it for the smartphone ...