» From sites » Specialist »Simple speaker (subwoofer) do-it-yourself

Simple speaker (subwoofer) do-it-yourself

Hello friends. These instructions will help you create a simple and powerful speaker. It is very easy to do, the author has uploaded all possible pictures of the process, please view all the images provided.

Step 1: How it works
Simple speaker (subwoofer) do-it-yourself

All you need is an enameled copper wire, a strong neodymium magnet and a plastic cup. The magnet vibrates the copper coil when it passes current, this vibration is amplified by a plastic cup. A fun experiment.

Step 2: Copper Wire

The author used an enameled copper wire extracted from some old electric motor or some kind of electronic component. The resulting copper wire begins to wrap around a cylinder that is similar in size to a magnet. It is very important to remove the icing from the ends of the wire to ensure electrical contact with the terminals.

Step 3: Assembling All Parts

I attached a coil of copper to the bottom with glue, attached the ends of the copper wire to the electrical terminals. I connected the wires to the plug from the computer, as shown in the video. Put a magnet in the middle of a copper coil. That's all, the speaker is created.
10
5
5

Add a comment

    • smilesmilesxaxaokdontknowyahoonea
      bossscratchfoolyesyes-yesaggressivesecret
      sorrydancedance2dance3pardonhelpdrinks
      stopfriendsgoodgoodgoodwhistleswoontongue
      smokeclappingcraydeclarederisivedon-t_mentiondownload
      heatirefullaugh1mdameetingmoskingnegative
      not_ipopcornpunishreadscarescaressearch
      tauntthank_youthisto_clueumnikacuteagree
      badbeeeblack_eyeblum3blushboastboredom
      censoredpleasantrysecret2threatenvictoryyusun_bespectacled
      shokrespektlolprevedwelcomekrutoyya_za
      ya_dobryihelperne_huliganne_othodifludbanclose
4 commentary
So he’s like a Kaa constrictor)) But it’s convenient, he put a glass on the table, an enameled wire, a cylinder, everything assembled by itself, it remains only to remove the “glaze”)))
the copper wire begins wrap oneself around around the cylinder
On your own? xaxa
These instructions will help you create a simple and powerful speaker.


Powerful, you say?
A magnet vibrates a copper coil when it passes current,
remove the icing from the ends of the wire,
And that’s it - subwoofer fool ready !! yahoo

We advise you to read:

Hand it for the smartphone ...